Kuvaus
Instructions for use:
Dilute with water 1:5 – 1:10 depending on the degree of dirt.
Note! pour water first, then acid. Apply with a low-pressure sprayer and leave to work for 1 – 10 min. Scrub difficult areas using a brush/sponge. Rinse with clean, pressurized water and finish with an alkaline detergent. Neutralizing the surface with an alkaline detergent after acid is very important! Not recommended for cleaning galvanized surfaces. Not suitable for chrome/high-polished surfaces.
Always test the surface for durability on a small area first.
Wear protective gloves.
